Silent+ Mini Lime
The next generation Silent+ Mini Lime has an anti-vibration damper and built-in sound absorbing materials. As well as a quick release reservoir, you can also commission the pump on site, and check operation via the LED system in the reservoir. Silence isn’t golden, it’s lime.
*Please note the performance graph differs from printed material ref Issue 4 09/2018
Air Conditioning
Refrigeration
Heating
Max. flow
12 L/h @ 0 headMax. rec. head
10mSound level
20dB(A) @ 1m
Key features
- Anti-vibration damper
- Pump sits in trunking elbow
- Left or right install
- LEDs provide visual operating feedback
Suitability
- Up to 16kW / 54,000Btu/h
- High wall split systems
- Perfect for... Commercial use where silence is important
Specification
-
Max. flow:12 L/h @ 0 head
-
Max. rec. head:10m
-
Sound level:20dB(A) @ 1m
-
Power supply: 230 VAC, 0.1A, 16W, 50/60Hz
-
Rated: Non continuous
-
Class: II Appliance
-
Max. unit output: 16kW / 54,000 Btu/h
-
Max. water temp: 40ºC / 104ºF
-
Discharge tube: 6mm ID
-
IP Protection: IP24
-
Safety switch: 5.0A Normally closed/open (5.0A volt free with Normally Closed/Normally Open contacts. Default factory set to Normally Closed mode).
-
Thermal protection: ✓
-
Fully potted: n/a
-
Self priming: ✓
-
Part number: FP3322/2
Flow Diagram
Installation Video
In the Box
- Silent+ Mini Lime pump (including 1.5m hard wired power cable)
- Anti-vibration pulse damper, anti-siphon device & 500mm discharge tube assembly
- 500mm Lime green inlet hose 14mm ID
- 40mm Vinyl breather tube 6mm ID
- Elbow front and back
- 800mm Conduit front and back
- Internal conduit sleeve (Slimline system only)
- Gasket (Slimline, Speediduct™ and Inoac systems only)
- Ceiling plate
- Drain connector kit
- Fixing kit
- Install manual
